valout.f File Reference

Go to the source code of this file.

Functions/Subroutines
subroutine	valout (lst, lend, time, nvar, naux)

Function/Subroutine Documentation

valout()

subroutine valout	(		lst,
			lend,
			time,
			nvar,
			naux
	)

Output the results for a general system of conservation laws in 2 dimensions

Write the results to the file fort.q<iframe> Use format required by matlab script plotclaw2.m or Python tools

set outaux = .true. to also output the aux arrays to fort.a<iframe>

Definition at line 5 of file valout.f.

References amr_module::alloc, amr_module::cornxlo, amr_module::cornylo, amr_module::hxposs, amr_module::hyposs, iadd(), amr_module::levelptr, amr_module::lfine, amr_module::lstart, amr_module::matlabu, amr_module::ndihi, amr_module::ndilo, amr_module::ndjhi, amr_module::ndjlo, amr_module::nghost, amr_module::node, amr_module::output_aux_components, amr_module::output_aux_onlyonce, amr_module::output_format, amr_module::rnode, amr_module::store1, amr_module::storeaux, amr_module::t0, amr_module::timevalout, and amr_module::timevaloutcpu.

Referenced by amr2(), and tick().

c
      use amr_module
      implicit double precision (a-h,o-z)
      character*10  fname1, fname2, fname3, fname4, fname5


      logical outaux
      integer output_aux_num 
      integer clock_start, clock_finish, clock_rate
      real(kind=8) cpu_start, cpu_finish

c      iadd(i,j,ivar) = loc + i - 1 + mitot*((ivar-1)*mjtot+j-1)
c      iaddaux(i,j,ivar) = locaux + i - 1 + mitot*((ivar-1)*mjtot+j-1)
      iadd(ivar,i,j)  = loc + ivar - 1 + nvar*((j-1)*mitot+i-1)
      iaddaux(iaux,i,j) = locaux + iaux-1 + naux*(i-1) +
     .                                      naux*mitot*(j-1)
c

      call system_clock(clock_start,clock_rate)
      call cpu_time(cpu_start)

c     # how many aux components requested?
      output_aux_num = 0
      do i=1,naux
          output_aux_num = output_aux_num + output_aux_components(i)
      enddo
                
c     # Currently outputs all aux components if any are requested!
      outaux = ((output_aux_num > 0) .and. 
     .         ((.not. output_aux_onlyonce) .or. (time==t0)))

c     open(unit=77,file='fort.b',status='unknown',access='stream')


c     ### Python graphics output
c

c        ###  make the file names and open output files
         fname1 = 'fort.qxxxx'
         fname2 = 'fort.txxxx'
         fname3 = 'fort.axxxx'
         fname4 = 'fort.bxxxx'
         matunit1 = 50
         matunit2 = 60
         matunit3 = 70
         matunit4 = 71
         nstp     = matlabu
         do 55 ipos = 10, 7, -1
            idigit = mod(nstp,10)
            fname1(ipos:ipos) = char(ichar('0') + idigit)
            fname2(ipos:ipos) = char(ichar('0') + idigit)
            fname3(ipos:ipos) = char(ichar('0') + idigit)
            fname4(ipos:ipos) = char(ichar('0') + idigit)
            nstp = nstp / 10
 55      continue

         open(unit=matunit1,file=fname1,status='unknown',
     .       form='formatted')

         if (output_format == 3) then
c            # binary output          
             open(unit=matunit4,file=fname4,status='unknown',
     &               access='stream')
             endif

         level = lst
         ngrids = 0
c65      if (level .gt. lfine) go to 90
 65      if (level .gt. lend) go to 90
            mptr = lstart(level)
 70         if (mptr .eq. 0) go to 80
              ngrids  = ngrids + 1
              nx      = node(ndihi,mptr) - node(ndilo,mptr) + 1
              ny      = node(ndjhi,mptr) - node(ndjlo,mptr) + 1
              loc     = node(store1, mptr)
              locaux  = node(storeaux,mptr)
              mitot   = nx + 2*nghost
              mjtot   = ny + 2*nghost
              if (ny.gt.1) then
                  write(matunit1,1001) mptr, level, nx, ny
                else
c                 # output in 1d format if ny=1:
                  write(matunit1,1003) mptr, level, nx
                endif
 1001 format(i6,'                 grid_number',/,
     &       i6,'                 AMR_level',/,
     &       i6,'                 mx',/,
     &       i6,'                 my')
 1003 format(i6,'                 grid_number',/,
     &       i6,'                 AMR_level',/,
     &       i6,'                 mx')


              xlow = rnode(cornxlo,mptr)
              ylow = rnode(cornylo,mptr)
              if (ny.gt.1) then
                  write(matunit1,1002)
     &              xlow,ylow,hxposs(level),hyposs(level)
                else
                  write(matunit1,1004)
     &              xlow,hxposs(level)
                endif
 1002 format(e26.16,'    xlow', /,
     &       e26.16,'    ylow', /,
     &       e26.16,'    dx', /,
     &       e26.16,'    dy',/)
 1004 format(e26.16,'    xlow', /,
     &       e26.16,'    dx', /)


        if (output_format == 1) then
             do j = nghost+1, mjtot-nghost
                do i = nghost+1, mitot-nghost
                   do ivar=1,nvar
                      if (abs(alloc(iadd(ivar,i,j))) < 1d-90) then
                         alloc(iadd(ivar,i,j)) = 0.d0
                      endif
                   enddo
                   write(matunit1,109) 
     &                (alloc(iadd(ivar,i,j)), ivar=1,nvar)
                enddo
                write(matunit1,*) ' '
             enddo
  109        format(50e26.16)
         endif

         if (output_format == 3) then
c            # binary output          
             i1 = iadd(1,1,1)
             i2 = iadd(nvar,mitot,mjtot)
c            # NOTE: we are writing out ghost cell data also, unlike ascii
             write(matunit4) alloc(i1:i2)
             endif

            mptr = node(levelptr, mptr)
            go to 70
 80      level = level + 1
         go to 65

 90     continue

c       -------------------
c       # output aux arrays
c       -------------------

        if (outaux) then
c     # output aux array to fort.aXXXX

           level = lst
 165       if (level .gt. lfine) go to 190
           mptr = lstart(level)
 170       if (mptr .eq. 0) go to 180
           nx      = node(ndihi,mptr) - node(ndilo,mptr) + 1
           ny      = node(ndjhi,mptr) - node(ndjlo,mptr) + 1
           locaux  = node(storeaux,mptr)
           mitot   = nx + 2*nghost
           mjtot   = ny + 2*nghost


           if (output_format == 1) then
              open(unit=matunit3,file=fname3,status='unknown',
     .             form='formatted')
              if (ny.gt.1) then
                 write(matunit3,1001) mptr, level, nx, ny
              else
c     # output in 1d format if ny=1:
                 write(matunit3,1003) mptr, level, nx
              endif
              xlow = rnode(cornxlo,mptr)
              ylow = rnode(cornylo,mptr)
              if (ny.gt.1) then
                 write(matunit3,1002)
     &                xlow,ylow,hxposs(level),hyposs(level)
              else
                 write(matunit3,1004)
     &                xlow,hxposs(level)
              endif

              do j = nghost+1, mjtot-nghost
                 do i = nghost+1, mitot-nghost
                    do ivar=1,naux
                       if (abs(alloc(iaddaux(ivar,i,j))) .lt. 1d-90) 
     &                      alloc(iaddaux(ivar,i,j)) = 0.d0
                    enddo
                    write(matunit3,109) (alloc(iaddaux(ivar,i,j)), 
     &                   ivar=1,naux)
                 enddo
                 write(matunit3,*) ' '
              enddo
           endif
           
           if (output_format == 3) then
c     # binary output          
              open(unit=matunit3,file=fname3,status='unknown',
     &             access='stream')
              i1 = iaddaux(1,1,1)
              i2 = iaddaux(naux,mitot,mjtot)
c     # NOTE: we are writing out ghost cell data also, unlike ascii
              write(matunit3) alloc(i1:i2)
           endif


           mptr = node(levelptr, mptr)
           go to 170
 180       level = level + 1
           go to 165

 190       continue
           close(unit=matunit3)
        endif                   !# end outputting aux array


c     --------------
c     # fort.t file:
c     --------------

      open(unit=matunit2,file=fname2,status='unknown',
     .       form='formatted')
      if (ny.gt.1) then 
          ndim = 2
        else
c         # special case where 2d AMR is used for a 1d problem
c         # and we want to use 1d plotting routines
          ndim = 1
        endif

c     # NOTE: we need to print out nghost too in order to strip
c     #       ghost cells from q when reading in pyclaw.io.binary
      write(matunit2,1000) time,nvar,ngrids,naux,ndim,nghost
 1000 format(e18.8,'    time', /,
     &       i6,'                 meqn'/,
     &       i6,'                 ngrids'/,
     &       i6,'                 naux'/,
     &       i6,'                 ndim'/,
     &       i6,'                 nghost'/,/)
c

      write(6,601) matlabu,time
  601 format('AMRCLAW: Frame ',i4,
     &       ' output files done at time t = ', d13.6,/)

      matlabu = matlabu + 1

      close(unit=matunit1)
      close(unit=matunit2)
      if (output_format == 3) then
          close(unit=matunit4)
      endif

      call system_clock(clock_finish,clock_rate)
      call cpu_time(cpu_finish)
      timevalout = timevalout + clock_finish - clock_start
      timevaloutcpu = timevaloutcpu + cpu_finish - cpu_start

      return

Here is the call graph for this function:

Here is the caller graph for this function: