Specifying GeoClaw parameters in setrun.py

Since GeoClaw is a modified version of AMRClaw, all of the parameters that are required for AMRClaw are also needed by GeoClaw. See Specifying AMRClaw run-time parameters in setrun.py for a discussion of these, and Specifying classic run-time parameters in setrun.py for a description of setrun.py input scripts more generally.

In addition, a number of other parameters should be set in the setrun.py file in any GeoClaw application. See also the Cautionary Hints on using GeoClaw for more about parameter choices.

It is best to look at a specific example while reading this section, for example in one of the subdirectories of $CLAW/geoclaw/examples/tsunami.

The function setrun in this module is essentially the same as for AMRClaw, except that it expects to be called with claw_pkg = ‘geoclaw’. This call should be performed properly by the Makefile if you have CLAW_PKG = geoclaw set properly there.

The new section setrun_setgeo in this module contains the new GeoClaw parameters.

A brief summary of these:

Additional AMR parameters

In addition to the standard AMRClaw parameters described in Specifying AMRClaw run-time parameters in setrun.py, some additional parameters governing how refinement is done should be specified for GeoClaw applications:

rundata.refinement_data.variable_dt_refinement_ratios : bool

The default is False, in which case refinement factors in time are specified by the user as usual in the array rundata.amrdata.refinement_ratios_t.

When True, this indicates that GeoClaw should automatically choose refinement factors in time on each level based on an estimate of the maximum wave speed on all grids at this level. For most hyperbolic problems the CFL condition suggests that one should refine in time by the same factor as in space. However, for GeoClaw applications where fine grids appear only in shallow coastal regions this may not be the case.

rundata.refinement_data.wave_tolerance : float

Cells are flagged for refinement if the difference between the surface elevation and sea level is larger than this tolerance. Note that whether refinement is actually done depends also on how various AMR regions have been set (see Section regions) and also on several other attributes described below that contain information on minimum and maximum refinement allowed in various regions.

rundata.refinement_data.max_level_deep : int

For simulations over the ocean, it is often useful to specify a maximum refinement level allowed in deep parts of the ocean. This is useful if a high level of refinement is specified on some rectangular region but only the parts of this region near the shore actually need to be refined.

rundata.refinement_data.max_level_deep : float

The deepness that triggers the refinement limitation imposed by max_level_deep above.

General geo parameters

rundata.geo_data has the following additional attributes:

gravity : float

gravitational constant in m/s**2, e.g. gravity = 9.81.

coordinate_system : integer

coordinate_system = 1 for Cartesian x-y in meters,

coordinate_system = 2 for latitude-longitude on the sphere.

earth_radius : float

radius of the earth in meters, e.g. earth_radius = 6367.5e3.

coriolis_forcing : bool

coriolis_forcing = True to include Coriolis terms in momentum equations

coriolis_forcing = False to omit Coriolis terms (usually fine for tsunami modeling)

sea_level : float

sea level (often sea_level = 0.) This is relative to the 0 vertical datum of the topography files used. It is important to set this properly for tsunami applications, see Setting sealevel.

friction_forcing : bool

Whether to apply friction source terms in momentum equations. See Manning friction term for more discussion of the next three parameters.

friction_depth : float

Friction source terms are only applied in water shallower than this, i.e. if h < friction_depth, assuming they have negligible effect in deeper water.

manning_coefficient : float or list of floats

For friction source terms, the Manning coefficient. If a single value is given, this value will be used where ever h < friction_depth. If a list of values is given, then the next parameter delineates the regions where each is used based on values of the topography B.

manning_break : list of floats

If manning_coefficient is a list of length N, then this should be a monotonically increasing list of length N-1 giving break points in the topo B used to determine where each Manning coefficient is used.

For example, if

manning_coefficient = [0.025, 0.06]
manning_break = [0.0]

then 0.025 will be used where B<0 and 0.06 used where B>0. (Subject still to the restriction that no friction is applied where h >= friction_depth.)

Topography data file parameters

See Topography data for more information about specifying topography (and bathymetry) data files in GeoClaw.

rundata.topo_data.topofiles : list of lists

topofiles should be a list of the form [file1info, file2info, etc.] where each element is itself a list of the form

[topotype, minlevel, maxlevel, t1, t2, fname]

with values

topotype : integer

1,2 or 3 depending on the format of the file (see Topography data).

minlevel : integer

the minimum refinement level that should be enforced in the region covered by this grid (for times between t1 and t2).

maxlevel : integer

the maximum refinement level that should be allowed in the region covered by this grid (for times between t1 and t2).

t1, t2 : floats

the time interval over which refinement should be controlled.

fname : string

the name of the topo file.

For more about controlling AMR in various regions, see regions.

rundata.dtopo_data.dtopofiles : list of lists

Information about topography displacement files, giving perturbations to topography generated by an earthquake, for example.

dtopofiles should be a list of the form [] or [file1info] where each element (currently at most 1 is allowed!) is itself a list of the form

[dtopotype, minlevel, maxlevel, fname]

with values

dtopotype : integer

1 or 3 depending on the format of the file (see Topography displacement files).

minlevel : integer

the minimum refinement level that should be enforced in the region covered by this grid.

maxlevel : integer

the maximum refinement level that should be allowed in the region covered by this grid.

fname : string

the name of the dtopo file. See Topography displacement files for information about the format of data in this file.

rundata.dtopo_data.dt_max_dtopo : float

the maximum time step allowed during the time interval over which the topography is moving. This is assumed to start at time t0 and to extend to the maximum time that any of the dtopo files specified is active. This avoids issues where the time step selected by the CFL condition is much larger than the time scale over which the topography changes. You must also set rundata.clawdata.dt_initial to the same value (or smaller) to insure that the first time step is sufficiently small.

qinit data file parameters

A modification to the initial data specified by default can be made as described at qinit data file.

iqinit : integer

Specifies what type of perturbation is stored in the qinitfile, see qinit data file for more information. Valid values for iqinit are

• 0 = No perturbation specified

• 1 = Perturbation to depth h

• 2 = Perturbation to x-momentum hu

• 3 = Perturbation to y-momentum hv

• 4 = Perturbation to surface level

qinitfiles : list of lists

qinitfiles should be a list of the form [] or [file1info] where each element (currently at most 1 is allowed!) is itself a list of the form

[minlevel, maxlevel, fname]

with values

minlevel : integer

the minimum refinement level that should be enforced in the region covered by this grid.

maxlevel : integer

the maximum refinement level that should be allowed in the region covered by this grid.

fname : string

the name of the qinitdata file. See Topography data for information about the format of data in this file.

See qinit data file for more details about the format.

AMR refinement region parameters

This is now a general AMRClaw parameter, still available in particular for GeoClaw applications. See Specifying AMR regions.

Fixed grid output parameters

fixedgrids : list of lists

This can be used to specify a set of grids where output should be produced at the specified resolution regardless of how the AMR grids look at each time. Interpolation from the best available grid near each point is used. This is useful for comparing AMR output to results obtained with other codes that use a fixed grid.

fixedgrids should be a list of the form [grid1info, grid2info, etc.] where each element is itself a list of the form

[t1, t2, x1, x2, y1, y2, xpoints, ypoints]

with values

t1, t2 : floats

the time interval over which output should be written for this grid.

x1, x2, y1, y2 : floats

the spacial extent of this grid.

xpoints, ypoints : floats

the number of grid points in the x and y directions (the grid will include x1, x2 and xpoints-2 points in between, for example).

ioutarrivaltimes : int

Deprecated feature. This should generally be set to 0. If you want to keep track of arrival times, it is recommended to use the new fgmax parameters described below.

ioutsurfacemax :

Deprecated feature. This should generally be set to 0. If you want to keep track of surface or depth maxima, it is recommended to use the new fgmax parameters described below.

Fixed grid maximum monitoring / arrival times

fgmax_files : list of strings

This can be used to specify a set of grids on which to monitor the maximum flow depth (or other quantities) observed over the course of the computation, and/or the arrival time of the flow or wave.

This works better than using the older fixedgrids approach since it now correctly interpolates when a grid point lies near the junction of two grid patches, which was not always handled properly before.

The “grids” also do not have to be rectangular grids aligned with the coordinate directions, but can consist of an arbitrary list of points that could also be points along a one-dimensional transect or points following a coastline, for example.

fgmax_files should be a list of strings specifying the file names of files that list the points on each grid and additional information required for each grid, as described at Fixed grid monitoring.